HETRONIK ISI KONTROL CIHAZLARI HC 200 SERİSİ
The HC200 is the first designed multiple channel heat control. The HC 200 controls multiple 230V constant resistive heaters such as quartz, ceramic, incoloy and tungsten.
This high end controller has the diagnostic feature, open heater detection, if using single or multiple heaters in a zone. The HC200 measures each zone wattage and compares this to the expected or known wattage of the zone. If the measured wattage does not equal the expected wattage an alarm is triggered. This provides the operator with critical information of single heater status or failure.
The power switch (triac) of each channel output is protected against short circuit by a super fast blow fuse located in a fuse holder. The fuse holder is located on the front of the HC block for quick accessed and exchange with out opening the HC block. This feature reduces failures, increases uptime and overall production
Hetronik Isı kontrol cıhazı
HC200-HN-12
Custom ID code:200.102
• 24 power outputs, 100...1000 W each (max. 2000 Watts/fuse)
• 12 fuses, FF 10 A
• 230 V phase-neutral
Hetronik Isı kontrol cıhazı
HC200-HN-12-DI
Custom ID code:200.302
• 24 power outputs, 100...1000 W each (max. 2000 Watts/fuse)
• 12 fuses, FF 10 A
• 230 V phase-neutral
• 4 digital control inputs (24 V dc) and 2 relay status outputs
Hetronik Isı kontrol cıhazı
HC200-HN-12-N
Custom ID code:200-502
• 24 power outputs, 100...1000 W each (max. 2000 Watts/fuse)
• 12 fuses, FF 10 A
• 230 V phase-neutral
• 3 screw able plug-type connectors with 4 neutral (N) clamping points each
Hetronik Isı kontrol cıhazı
HC200-HN-24
Custom ID code:200.111
• 24 power outputs, 100...1000 W (max. 2000 Watts/fuse
and 9100 Watts/Phase)
• 24 fuses, FF 6,3 A
• 230 V phase-neutral
Hetronik Isı kontrol cıhazı
HC205-HN-12
Custom ID code:205.102
• 24 power outputs, 100...1000 W each and max. 1500 W each fuse
• 12 fuses, FF 10 A
• 230 V phase-neutral
• softstart for short wave lamps
• internal inductances
• no triac protection against voltage peaks
Hetronik Isı kontrol cıhazı
HC205-HN-12-DI
Custom ID code:205.302
• 24 power outputs, 100...1000 W each and max. 1500 W each fuse
• 12 fuses, FF 10 A
• 230 V phase-neutral
• 4 digital control inputs (24 V dc) and 2 relay status outputs
• softstart for short wave lamps
• internal inductances
• no triac protection against voltage peaks
Hetronik Isı kontrol cıhazı
Custom ID code:205.502
HC205-HN-12-N
• 24 power outputs, 100...1000 W each and max. 1500 W each fuse
• 12 fuses, FF 10 A
• 230 V phase-neutral
• 3 screw able plug-type connectors with 4 neutral (N) clamping points each
• softstart for short wave lamps
• internal inductances
• no triac protection against voltage peaks
Hetronik Isı kontrol cıhazı
Custom ID code:205.111
HC205-HN-24
• 24 power outputs, 100...1100 W each
• 24 fuses. FF 10 A
• 230 V phase-neutral
• softstart for short wave lamps
• no internal inductances
• no triac protection against voltage pea
Türkiyede Hetronik Isı kontrol cıhazı ürünleri ile ilgili uygun rekabetçi fiyatları almak için müşteri temsilcimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış mühendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.
Detaylı Bilgi FiyatHetronik Isı Kontrol Cıhazları HC100 Serisi
The HC100 is design to control short wave IR lamps (Halogen, Tungsten, NIR) at 400V.
Each HC100 HC-block can control 9 channels up to 4000 watts per channel.
This systems unique direct-mount bus bar system eliminates fusing for the power voltage supply. In addition the power output and return phase are protected with super fast blow fuses mounted directly on the HC block. This powerful robust compact system will reduce panel space and installation time while maintaining optimum control of the lamps
Hetronik Isı Kontrol Cıhazı
HC100-2-HN-9
• 9 power outputs, 100...4000 W each
• max. 3 m cable length to heaters
• 9 x 2 fuses, FF 16 A gRL
• 400 Volt phase-phase
• softstart for short wave lamps
• no internal inductances
• 24 V dc fan
Hetronik Isı Kontrol Cıhazı
HC100-3-HN-9
• 9 power outputs, 100...4500 W each (…4.000 W with UL)
• 9 x 2 fuses, FF 16 A gRL
• 400 Volt phase-phase
• softstart for short wave lamps
• no internal inductances
• 24 V dc fan
Türkiyede Hetronik Isı kontrol cıhazı ürünleri ile ilgili uygun rekabetçi fiyatları almak için müşteri temsilcimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış mühendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.
Detaylı Bilgi FiyatHetronik Isı Kontrol Cıhazları HC 300 SAerisi
HC-block for heaters with 400...480 Volts (phase/phase)
and 4000...4800 Watts
each of its 24 channels
Hetronik Isı Kontrol Cıhazı
Custom ID code : 300.151
HC300-HN-480-115
• 24 power outputs, 0.65...10.0 A each
• 24 fuses, FF 12,5 A
• 400...480 V heaters
• 115 V ac CPU supply voltage
• 115 V ac fan
Hetronik Isı Kontrol Cıhazı
Custom ID code :300.152
HC300-HN-480-230
• 24 power outputs, 0.65...10.0 A each
• 24 fuses, FF 12,5 A
• 400...480 V heaters
• 230 V ac CPU supply voltage
• 230 V ac fan
Hetronik Isı Kontrol Cıhazı
Custom ID code :300.161
HC300-HN-480-115-EP
• 24 power outputs, 0.65...10.0 A each
• 24 fuses, FF 12,5 A
• 400...480 V heaters
• extended triac protection against voltage peaks
• 115 V ac CPU supply voltage
• 115 V ac fan
Hetronik Isı Kontrol Cıhazı
Custom ID code :300.162
HC300-HN-480-230-EP
• 24 power outputs, 0,65...10,0 A each
• 24 fuses, FF 12,5 A
• 400...480 V heaters
• extended triac protection against voltage peaks
• 230 V ac CPU supply voltage
• 230 V ac fan
Custom ID code :300.251
HC300-HN-480-115-DI
• 24 power outputs, 0,65...10,0 A each
• 24 fuses, FF 12,5 A
• 400...480 V heaters
• 115 V ac CPU supply voltage
• 115 V ac fan
• 4 digital control inputs (24 V dc) and 2 relay status outputs
Hetronik Isı Kontrol Cıhazı
Custom ID code :300.252
HC300-HN-480-230-DI
• 24 power outputs, 0,65...10,0 A each
• 24 fuses, FF 12,5 A
• 400...480 V heaters
• 230V ac CPU supply voltage
• 230V ac fan
• 4 digital control inputs (24 V dc) and 2 relay status outputs
Hetronik Isı Kontrol Cıhazı
Custom ID code :300.261
HC300-HN-480-115-DI-EP
• 24 power outputs, 0,65...10,0 A each
• 24 fuses, FF 12,5 A
• extended triac protection against voltage peaks
• 400...480 V heaters
• 115 V ac CPU supply voltage
• 115 V ac fan
• 4 digital control inputs (24 V dc) and 2 relay status outputs
Hetronik Isı Kontrol Cıhazı
Custom ID code :300.262
HC300-HN-480-230-DI-EP
• 24 power outputs, 0,65...10,0 A each
• 24 fuses, FF 12,5 A
• extended triac protection against voltage peaks
• 400...480 V heaters
• 230 V ac CPU supply voltage
• 230 V ac fan
• 4 digital control inputs (24 V dc) and 2 relay status outputs
Türkiyede Hetronik Isı kontrol cıhazı ürünleri ile ilgili uygun rekabetçi fiyatları almak için müşteri temsilcimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış mühendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.
Detaylı Bilgi FiyatHetronik Isı Kontrol Cıhazları HC 400 Serisi
HC-block for quartz and ceramic heaters with 230...480 line voltage (phase/neutral or phase/phase).
For 24 control outputs for 24 channels
Max. 400 amps/phase
Hetronik Isı Kontrol Cıhazı
HC400
Custom ID code : 85 37 10 99 (HC400 as complete unit)
CPU-module
Custom ID code : 85 37 10 99 (single product)
Hetronik Isı Kontrol Cıhazı
Custom ID code :400.201
HC400-CU-HN-24-LED
• 24 SSR control outputs (24 V dc)
• 24 output status LEDS
Hetronik Isı Kontrol Cıhazı
Custom ID code :400.401
HC400-CU-HN-24-LED-DI
• 24 SSR control outputs
• 24 output status LEDS
• 4 digital control inputs (24 V dc) and 2 relay status output
Measurement unit
Custom ID code : 90 30 31 90 (single product)
Hetronik Isı Kontrol Cıhazı
Custom ID code :400.501
HC400-MU-48/40
• max. 480 V line voltage
• max. 400 A each phase
Junction cable
Custom ID code : 85 44 41 90 (single product)
Custom ID code :400.607
HC400-JC-75
• 75 cm length
Türkiyede Hetronik Isı kontrol cıhazı ürünleri ile ilgili uygun rekabetçi fiyatları almak için müşteri temsilcimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış mühendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.
Detaylı Bilgi FiyatHetronik Isı kontrol cıhazları HC500 Serisi
Low cost system for quartz and ceramic heaters and short wave lamps with 230Volts (phase/neutral).
Power outputs card with 8 and 16 channels and 2000/2500 and 1000 Watts each channel Content will online soon.
HC500
Custom ID code : 85 37 10 99 (HC500 as complete unit)
CPU
Custom ID code : 85 37 10 99 (single product)
Custom ID code :500.101
HC500-CU
HC500 CPU
• for max. 64 insert output cards
• HC-NET interface (RS485)
• HCdiag interface (RS232)
• 2 digital control inputs (24 V dc)
• incl. HCBUS-CON-L with 120 Ohm terminator resistor
Voltage measurement unit
Custom ID code : 90 30 37 90 (single product)
Custom ID code :500.401
HC500-VU-230
HC500 voltage measurement unit
• 400/230 V
Insert output card
Custom ID code : 85 44 41 90 (single product)
Custom ID code :510.211
HC510-OC-230
• for HC510 racks
• 16 power outputs, 1000 W each
• 16 fuses, 5 x 20 mm, FF 6.3 A
• 230 V phase-neutral
Custom ID code :510.221
HC510-OC-230-16-S
• for HC510 racks
• 16 power outputs, 1000 W each
• 16 fuses, 5 x 20 mm, FF 10 A
• 230 V phase-neutral
• softstart for short wave lamps
Custom ID code :510.231
HC510-OC-230-10
• for HC510 racks
• 8 power outputs, 2500 W each
• 10 fuses, 6.3 x 32 mm, FF 12.5 A
• 230 V phase-neutral
Custom ID code :510.241
HC510-OC-230-10-S
• für HC510 Rack
• 8 power outputs, 2000 W each
• 10 fuses, 6.3 x 32 mm, FF 12.5 A
• 230 V phase-neutral
• softstart for short wave lamps
Türkiyede Hetronik Isı kontrol cıhazı ürünleri ile ilgili uygun rekabetçi fiyatları almak için müşteri temsilcimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış mühendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.
Detaylı Bilgi FiyatHetronik Isı Kontrol
HC HMIs
Operator interfaces that can be interfaced direcly with the HC-blocks (no PLC needed)
Türkiyede Hetronik ısı Kontrol ürünleri ile ilgili uygun rekabetçi fiyatları almak için müşteri temsilcimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış mühendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.
Detaylı Bilgi FiyatHetronik Isı Kontrol
HC Modules to be interfaced between a host system and HC-blocks. Acting as protocol or bus gateway to the HC specific HC-NET protocol or acting as temperature controller
Türkiyede Hetronik ısı Kontrol ürünleri ile ilgili uygun rekabetçi fiyatları almak için müşteri temsilcimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış mühendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.
Detaylı Bilgi Fiyat